4/6/8-channel piezoelectric inkjet system using VariaDot® imaging technology; with one 636-nozzle, variable droplet printhead per channel.
1340 GT: CMYK 1360 GT: CMYK+WW/V 1380 GT: CMYK+WW/V +cm
Variable droplet sizes from 6 to 42 picoliters. The ability to vary the drop size to 6 picoliters produces sharp images with smoother gradients and quartertones. The ability to jet larger droplets up to 42 picoliters produces uniform colors. The result is near-photographic quality with sharpness only before seen at resolutions of 1,440 dpi or higher. Text as small as 2 pt. is perfectly legible (with High Definition mode).
|Print Modes||Arizona 13x0 GT||Flatbed||RMO|
|1340 GT||1360 GT||1380 GT||m2/h||ft2/h||m2/h||ft2/h|
|Varnish (High Gloss)||o||o||~4||43.1||n.a.||n.a.|
IJC357 UV-curable inks packed in quick-change, 2 liter bags for: Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta. White and Varnish packed in 1 liter bags.
True flatbed for rigid media printing with available Roll Media Option for flexible media printing.
|Measured Over||Maximum Error|
|Line length (system width)||2,500 mm||2,190 mm||± 0.8 mm||± 0.6 mm|
|Line length (system height)||1,250 mm||2,000 mm||± 0.4 mm||± 1.5 mm|
|Line straightness (system width)||2,500 mm||2,190 mm||0.7 mm||0.7 mm|
|Line straightness (system height)||1,250 mm||2,000 mm||0.5 mm||2.0 mm|
|Diagonal Error (“square-ness”)||1,250x2,500 mm||2,000x2,190 mm||1.0 mm||2.5 mm|
Maximum Area: 125 x 250 cm / 49.2 x 98.4 inches
Maximum Thickness: 50.8 mm / 2.0 inches Maximum
Mass: 34 kg/m2 / 7 lbs/ft2
Up to: 126 x 251 cm / 49.6 x 98.8 inches (for edge-to-edge printing)
90 to 220 cm / 35.4 to 86.6 inches. Up to 50 kg / 110 lbs (at any width). Maximum diameter: 240 mm (9.45 inches). Core: 3 inches (inside). Bias: Print-side-in or print-side-out. Most types (application dependent)
Up to 219 cm / 86.2 inches
ONYX® Thrive™ 18 (421 configuration or greater recommended)
Arizona Xpert offers a unique tool set to save time and money in the creation of complex, multi-layered and duplex applications. The “ Arizona Xpert Resale license” and the “Add Arizona Xpert Permission” are included with every Arizona 1300 printer and require ONYX Thrive to be installed.
2 x 200-240 VAC, 50/60 Hz, Single-phase, 16A per circuit Circuit Breakers: North America: 20A. Europe: 16A. ROW: See CB Scheme Report Clean, dry, compressed air using a Coalescing Filter. Pressure Regulator set to 690 kPa (100 psi) and connects air regulator to ½ inch or 12mm OD air tubing. Peak flow: 57 l/min at 690 kPa (2 cfm at 100 psi)
Temperature: 18˚ to 30˚ C (64˚ to 86˚ F) Relative humidity: 30 to 70% (non-condensing) Ventilation: 1,200 m3 per hour / 700 cfm minimum (see Site Preparation Guide) Altitude: 2,750 m (9,020 feet) maximum, however some components specify a limit of 2,000 m (6,560 feet)
Printer only: 4.66 m x 2.0 m (183.5” x 78.7”), 849 kg (1,871 lbs.) Printer + Roll Media Option: 4.66 m x 2.29 m (183.5” x 90.2”), 1,099 kg (2,423 lbs.) Table height: 0.88 m (34.6”) / Overall height: 1.3 m (51.2”)